This tester is used to conduct static impact test upon head-rest of car seats. While testing, apply a force torque upon the seat back, and then apply another force upon head-rest and then measure its displacement.
Specifications
•
Size of working table
130x100 cm (used for testing front and rear seats)
T slot (with M12 thread), transverse direction, distance 200 mm
•
Test method
Step A, apply 38 kgf-m force torque backwards upon sample by its back disk at the direction vertical to the seat back, then stop the loading screw and hold at this position.
Step B. Then use the semi-sphere mould to apply 42 kgf-m force torque backwards upon sample at the direction vertical to the seat back at 65 mm position below the head-rest, then stop. Or, after stop, apply another force until sample breaks.
Repeat step A and B and then test finishes.
The above-mentioned force torque, angle can be modified as per different car types.
•
Test speed
3~8 mm/sec available to preset (or as requested)
•
Load cell
5 kN x 2 pcs
•
Power
3ø, 380 V, 50 Hz or 3ø 220 V, 60 Hz
•
Dimensions (WxDxH)
main body: 120x130x250 cm
control box: 125x65x139 cm
•
Weight
main body: 1420 kg
control box: 200 kg
총 0건, 1/0 Page
NO
신뢰성
제목
작성자
평가점수
날짜
상호 : 희몽무역 / 대표 : 김영완 / 사업자 등록번호 : 108-05-83519 / 공정거래위원회사업자확인/통신판매번호 : 제 2013-경기광명-0312 호
주소 : 경기도 광명시 하안로 60 (소하동, 광명테크노파크) 광명테크노파크 E동 612호/ TEL : 02-806-7082 / FAX : 02-806-7083 / Email : wbt@testerhouse.co.kr
copyright(c) 2002 희몽무역_측정기, 시험기, 특수 제작All Rights Reserved.