Specifications |
Model |
HT-2402, HT-2402BP, HT-2402BI
|
•
|
Capacity |
kN
|
250
|
100
|
50
|
•
|
Measurement
of test force |
Standard-accuracy type (Class 1)
|
Accuracy of test force is better than ±1% within the range 1/1~1/250 of full scale of load cell, which conforms to most international standards such as ISO 7500/1 class 1, EN 10002-2 grade 1, BS 1610 class 1, DIN 51221 class 1, ASTM E4, JIS B7721 class 1, JIS B7723 class 1, JJG 475-88, GB/T 16491-1996 class 1 and CNS 9470/9471. |
High-accuracy type (Class 0.5)
|
Accuracy of test force is better than ±0.5% within the range 1/1~1/250 of full scale of load cell, which conforms to most international standards such as ISO 7500/1 class 0.5, EN 10002-2 grade 0.5, BS 1610 class 0.5, DIN 51221 class 0.5, ASTM E4, JIS B7721 class 0.5, JIS B7723 class 0.5, JJG 139-1999, GB/T 16491-1996 class 0.5 and CNS 9470/9471. |
Load cell
|
H-8336 Low profile high precision tension/compression load cell as standard (maximum force x 1 set, with excellent expanding feature, available to connect several load cells at a time – optional) |
Load amplification
|
Type HT-2402 equipped with HUNG TA interface system, available with: ( A,B select one)
(A) x1, x2, x5, x10, x20, x50, x100 seven gain(s) with auto range function, resolution 1/200,000; The factor 1/100,000 for single gain
(B) x1, x2, x5, x10 four gains with auto range function, resolution 1/2000 function, resolution 1/20,000 |
Types HT-2402BP and HT-2402BI equipped with HT-2010 control indicator, available with x1, x2, x5, x10 four scales with auto range function, resolution 1/20000 |
Selection of force units
|
N, kN |
•
|
Test speed range (mm/min), with stepless setting
|
Type HT-2402, 0.005~500 mm/min |
Types HT-2402BP, HT-2402BI 0.05~500 mm/min |
Force applied should be no less than 25% of full scale of load cell if test speed is greater than 50mm/min (GB/T 16491-1996) |
•
|
Accuracy of speed control |
±1% (class 1) |
±1% (class 1) |
±1% (class 1) |
•
|
Accuracy of speed control |
±0.2% (class 0.5) |
±0.2% (class 0.5) |
±0.2% (class 0.5) |
•
|
Effective test depth |
575 mm |
575 mm |
575 mm |
•
|
Crosshead working table distance |
Max. 1440 mm |
Max. 1250 mm |
Max. 1250 mm |
•
|
Test stroke
(equipped with standard tensile grips) |
600 mm |
650 mm |
650 mm |
•
|
Over-travel & Overload
protection function |
Stroke up & down position protection setting, when test force exceeds 10% of full scale, system auto stop to protection the system from overloaded. |
•
|
Power |
Servo motor
|
AC servo motor & servo driver |
Consumption
|
7.5 kVA |
3.5 kVA |
2.2 kVA |
Power supply
|
3ø, 220VAC, 50/60 Hz (380V/415 V optional) |
•
|
Measuring
system |
Hardware
|
Refer to computer hardware specifications |
Controller
|
HT-2402 connects HUNG TA Interface system; HT-2402BP/HT-2402BI connects HT-2010 Control indicator |
Special software
|
Refer to special control modes of computer measuring system (optional) |
•
|
Dimensions |
Console (WxDxH)
|
117x83x249 cm |
111x76x225 cm |
111x76x225 cm |
Control unit (WxDxH)
|
HT-2402/HT-2402BP: 120x60x74 cm, HT-2402BI doesn’t have control unit |
•
|
Weight |
Console
|
1500 kg |
1000 kg |
750 kg |
Control unit
|
100 kg |
100 kg |
100 kg |
•
|
Standard accessories |
Tensile grips x 1set, tool kit x 1set, operation manual x 1set, certificate of calibration x 1set |
•
|
Optional
accessories |
Extensometer
|
Refer to the specifications of HT-9160, HT-9161, HT-9860, HT-8160 (optional) |
Thermostat chamber
|
Refer to the specifications of HT-8747 series (optional) |
Grips
|
Refer to the brochure of grips and fixtures, or provide specifications or actual samples for design and manufacture |